Aqua Shine High-Solids Water-Based Acrylic Sealer

Aqua Shine is a water-based methacrylate cure and sealer developed for interior and exterior applications, such as exposed aggregate, natural stone, brick, quarry tile, terrazzo, and other concrete surfaces

Aqua Shine beautifies and enhances the patterns and colors of all treated surfaces with a satin gloss sheen.

Complies with Federal VOC standards for curing and sealing compounds. 

• Stamped concrete
• Exposed aggregate
• Acid stained concrete
• Integrally colored concrete

Features

• Low odor
• Minimizes efflorescence
• Will not yellow under extreme UV exposure
• Acts as a binder to minimize aggregate pop-out
• Provides resistance to abrasion and a wide range of chemicals and oils
• Protects sealed surfaces from damaging effects of deicing salts and acid rain

Application

• Preparation: Ready to use without dilution. Apply when temperature is above 40°F and rising.
• New Concrete/Exposed Aggregate: Apply uniformly with a sprayer or roller. For increased gloss, a second coat may be applied after 6-8 hours.
• Existing Concrete: Ensure the surface is clean, dry, and free of stains, oil, grease, and incompatible coatings. Apply as recommended, with special attention to smooth, dense surfaces for optimal results.

Packaging

Available in 55-gallon drums and 5-gallon pails

Shelf Life

Aqua Shine has a shelf life of two years in its original, tightly sealed container

Coverage

• New or Existing Concrete: 200 – 400 sq ft/gal
• Exposed Aggregate: 200 – 300 sq ft/gal
• Brick, Stucco, etc.: 200 – 300 sq ft/gal

Test Data

• VOC: < 100 g/L
• Color: White (dries clear)
• Drying Time: 4 hours
• Flash Point: > 20

Standards

VOC Content: Less than 100 g/L, complying with ASTM C 1315 Type I, Class A.

Cleaning

Application equipment should be cleaned with water before the product dries. For dried product, xylene or approved solvents should be used.