SpecStrip WB - Reactive Water-Based Form Release Agent
Reactive Water-Based Form Release Agent for All Concrete Forms
SpecStrip WB is a reactive, water-based form release agent designed for use on all types of concrete forming systems including steel, aluminum, fiberglass, plywood, and dimensional lumber. It is engineered to prevent concrete from bonding to formwork while promoting clean release and improved surface quality.
The product forms a thin reactive film that helps reduce surface defects such as bugholes and minimizes concrete buildup on forms and liners. It also helps extend the life of formwork by reducing cleaning requirements and protecting steel surfaces from rust.
Key Features & Benefits
Clean Form Release
Ensures easy stripping of concrete from forms while reducing adhesion and surface tearing.
Reduced Bugholes
Helps minimize surface voids and bugholes for improved architectural concrete finish quality.
Rust Protection for Steel Forms
Leaves a protective coating on steel formwork that helps prevent corrosion and rust formation.
No Residue or Staining
Proper application leaves no residue, discoloration, or staining on finished concrete surfaces.
VOC Compliant Formula
Designed to meet strict environmental regulations with low VOC content for jobsite compliance.
Improved Form Efficiency
Reduces cleaning time, buildup, and maintenance requirements on reusable form systems.
Common Applications
Cast-in-Place Concrete
Used on walls, columns, slabs, and structural concrete where clean release is required.
Architectural Concrete
Ideal for projects requiring smooth, consistent finishes with minimal surface defects.
Precast Concrete Production
Improves efficiency and surface quality in precast form systems.
Bridge & Infrastructure Work
Commonly used in large-scale infrastructure and DOT projects.
Wood & Metal Formwork Systems
Compatible with steel, aluminum, fiberglass, MDO plywood, HDO plywood, and lumber forms.
Recommended Form Materials
SpecStrip WB can be used on:
- Steel forms
- Aluminum forms
- Fiberglass forms
- Plastic forms
- HDO plywood
- MDO plywood
- Dimensional lumber
- BB grade plywood
- Form liners and styrene bead systems
Application Instructions
Surface Preparation
- Forms must be clean and free of concrete buildup, dirt, rust, and scale
- Do not apply over contaminated or wet surfaces
- Agitate product before use if needed
Application Method
- Apply using low-pressure spray equipment with misting/atomizing tip
- Apply a thin, uniform film across all form surfaces
- Avoid over-application or puddling
- Remove excess material if necessary using rags or squeegee
Important Notes
- Do not dilute product
- Over-application may cause dusting or surface issues
- Proper thin application is critical for best performance
Coverage Rates
Coverage varies by substrate:
| Form Type | Coverage |
|---|---|
| Steel / Plastic / Fiberglass | ~1000 sq ft/gal |
| Aluminum (conditioned) | ~1000 sq ft/gal |
| HDO / MDO Plywood | ~1000 sq ft/gal |
| Dimensional Lumber | ~1000 sq ft/gal |
| BB Grade Plywood | ~1000 sq ft/gal |
Actual coverage depends on surface condition and porosity.
Performance Characteristics
Smooth Concrete Finish
Promotes cleaner concrete surfaces with reduced voids and improved appearance.
Form Protection
Helps extend the life of reusable formwork systems by reducing wear and buildup.
Improved Productivity
Reduces stripping time and cleanup requirements on job sites.
Consistent Results
Ensures uniform release performance across multiple form types and materials.
Packaging
- 5 Gallon Pails
- 55 Gallon Drums
- 275 Gallon Totes
Shelf Life & Storage
Shelf Life
- 1 year in original sealed containers
Storage Conditions
- Store in tightly sealed containers
- Keep free from contamination (water, dirt, debris)
- Store in a cool, dry environment
- Agitate before use if stored long-term
Frequently Asked Questions
What is SpecStrip WB used for?
It is used as a water-based reactive form release agent to prevent concrete from bonding to forms and improve surface finish.
Does SpecStrip WB reduce bugholes?
Yes. It helps minimize surface voids and bugholes for a smoother concrete finish.
Can it be used on wood forms?
Yes. It is compatible with plywood and dimensional lumber form systems.
Does it leave residue on concrete?
No. When properly applied, it does not leave residue, stains, or discoloration.
Is it safe for steel forms?
Yes. It actually helps protect steel forms from rust and corrosion.
Does it need to be diluted?
No. It is a ready-to-use product and should not be diluted.
Technical Data Summary (TDS)
Product Type
- Reactive water-based form release agent
Appearance
- Liquid (water-based emulsion)
VOC Content
- Low VOC compliant (<100 g/L)
Application Method
- Low-pressure spray (mist application)
Coverage
- ~1000 sq ft/gal (varies by substrate)
Use Surfaces
- Steel, aluminum, wood, fiberglass, plastic forms
Finish Result
- Clean release, no residue
Packaging
- 5 gal / 55 gal / 275 gal
Shelf Life
- 1 year
Safety Data Summary (SDS)
Hazard Information
SpecStrip WB may:
- Cause mild skin irritation
- Cause eye irritation on contact
- Require adequate ventilation during spraying
Recommended PPE
- Safety glasses
- Gloves
- Protective clothing
- Respirator if misting in enclosed areas
First Aid
Eye Contact
- Flush with water for at least 15 minutes
Skin Contact
- Wash with soap and water
Inhalation
- Move to fresh air
Ingestion
- Seek medical attention if symptoms occur
Original: $404.58
-65%$404.58
$141.60
Description
Reactive Water-Based Form Release Agent for All Concrete Forms
SpecStrip WB is a reactive, water-based form release agent designed for use on all types of concrete forming systems including steel, aluminum, fiberglass, plywood, and dimensional lumber. It is engineered to prevent concrete from bonding to formwork while promoting clean release and improved surface quality.
The product forms a thin reactive film that helps reduce surface defects such as bugholes and minimizes concrete buildup on forms and liners. It also helps extend the life of formwork by reducing cleaning requirements and protecting steel surfaces from rust.
Key Features & Benefits
Clean Form Release
Ensures easy stripping of concrete from forms while reducing adhesion and surface tearing.
Reduced Bugholes
Helps minimize surface voids and bugholes for improved architectural concrete finish quality.
Rust Protection for Steel Forms
Leaves a protective coating on steel formwork that helps prevent corrosion and rust formation.
No Residue or Staining
Proper application leaves no residue, discoloration, or staining on finished concrete surfaces.
VOC Compliant Formula
Designed to meet strict environmental regulations with low VOC content for jobsite compliance.
Improved Form Efficiency
Reduces cleaning time, buildup, and maintenance requirements on reusable form systems.
Common Applications
Cast-in-Place Concrete
Used on walls, columns, slabs, and structural concrete where clean release is required.
Architectural Concrete
Ideal for projects requiring smooth, consistent finishes with minimal surface defects.
Precast Concrete Production
Improves efficiency and surface quality in precast form systems.
Bridge & Infrastructure Work
Commonly used in large-scale infrastructure and DOT projects.
Wood & Metal Formwork Systems
Compatible with steel, aluminum, fiberglass, MDO plywood, HDO plywood, and lumber forms.
Recommended Form Materials
SpecStrip WB can be used on:
- Steel forms
- Aluminum forms
- Fiberglass forms
- Plastic forms
- HDO plywood
- MDO plywood
- Dimensional lumber
- BB grade plywood
- Form liners and styrene bead systems
Application Instructions
Surface Preparation
- Forms must be clean and free of concrete buildup, dirt, rust, and scale
- Do not apply over contaminated or wet surfaces
- Agitate product before use if needed
Application Method
- Apply using low-pressure spray equipment with misting/atomizing tip
- Apply a thin, uniform film across all form surfaces
- Avoid over-application or puddling
- Remove excess material if necessary using rags or squeegee
Important Notes
- Do not dilute product
- Over-application may cause dusting or surface issues
- Proper thin application is critical for best performance
Coverage Rates
Coverage varies by substrate:
| Form Type | Coverage |
|---|---|
| Steel / Plastic / Fiberglass | ~1000 sq ft/gal |
| Aluminum (conditioned) | ~1000 sq ft/gal |
| HDO / MDO Plywood | ~1000 sq ft/gal |
| Dimensional Lumber | ~1000 sq ft/gal |
| BB Grade Plywood | ~1000 sq ft/gal |
Actual coverage depends on surface condition and porosity.
Performance Characteristics
Smooth Concrete Finish
Promotes cleaner concrete surfaces with reduced voids and improved appearance.
Form Protection
Helps extend the life of reusable formwork systems by reducing wear and buildup.
Improved Productivity
Reduces stripping time and cleanup requirements on job sites.
Consistent Results
Ensures uniform release performance across multiple form types and materials.
Packaging
- 5 Gallon Pails
- 55 Gallon Drums
- 275 Gallon Totes
Shelf Life & Storage
Shelf Life
- 1 year in original sealed containers
Storage Conditions
- Store in tightly sealed containers
- Keep free from contamination (water, dirt, debris)
- Store in a cool, dry environment
- Agitate before use if stored long-term
Frequently Asked Questions
What is SpecStrip WB used for?
It is used as a water-based reactive form release agent to prevent concrete from bonding to forms and improve surface finish.
Does SpecStrip WB reduce bugholes?
Yes. It helps minimize surface voids and bugholes for a smoother concrete finish.
Can it be used on wood forms?
Yes. It is compatible with plywood and dimensional lumber form systems.
Does it leave residue on concrete?
No. When properly applied, it does not leave residue, stains, or discoloration.
Is it safe for steel forms?
Yes. It actually helps protect steel forms from rust and corrosion.
Does it need to be diluted?
No. It is a ready-to-use product and should not be diluted.
Technical Data Summary (TDS)
Product Type
- Reactive water-based form release agent
Appearance
- Liquid (water-based emulsion)
VOC Content
- Low VOC compliant (<100 g/L)
Application Method
- Low-pressure spray (mist application)
Coverage
- ~1000 sq ft/gal (varies by substrate)
Use Surfaces
- Steel, aluminum, wood, fiberglass, plastic forms
Finish Result
- Clean release, no residue
Packaging
- 5 gal / 55 gal / 275 gal
Shelf Life
- 1 year
Safety Data Summary (SDS)
Hazard Information
SpecStrip WB may:
- Cause mild skin irritation
- Cause eye irritation on contact
- Require adequate ventilation during spraying
Recommended PPE
- Safety glasses
- Gloves
- Protective clothing
- Respirator if misting in enclosed areas
First Aid
Eye Contact
- Flush with water for at least 15 minutes
Skin Contact
- Wash with soap and water
Inhalation
- Move to fresh air
Ingestion
- Seek medical attention if symptoms occur
