Reactive Water-Based Form Release Agent for All Concrete Forms

SpecStrip WB is a reactive, water-based form release agent designed for use on all types of concrete forming systems including steel, aluminum, fiberglass, plywood, and dimensional lumber. It is engineered to prevent concrete from bonding to formwork while promoting clean release and improved surface quality.

The product forms a thin reactive film that helps reduce surface defects such as bugholes and minimizes concrete buildup on forms and liners. It also helps extend the life of formwork by reducing cleaning requirements and protecting steel surfaces from rust.

Key Features & Benefits

Clean Form Release

Ensures easy stripping of concrete from forms while reducing adhesion and surface tearing.

Reduced Bugholes

Helps minimize surface voids and bugholes for improved architectural concrete finish quality.

Rust Protection for Steel Forms

Leaves a protective coating on steel formwork that helps prevent corrosion and rust formation.

No Residue or Staining

Proper application leaves no residue, discoloration, or staining on finished concrete surfaces.

VOC Compliant Formula

Designed to meet strict environmental regulations with low VOC content for jobsite compliance.

Improved Form Efficiency

Reduces cleaning time, buildup, and maintenance requirements on reusable form systems.

Common Applications

Cast-in-Place Concrete

Used on walls, columns, slabs, and structural concrete where clean release is required.

Architectural Concrete

Ideal for projects requiring smooth, consistent finishes with minimal surface defects.

Precast Concrete Production

Improves efficiency and surface quality in precast form systems.

Bridge & Infrastructure Work

Commonly used in large-scale infrastructure and DOT projects.

Wood & Metal Formwork Systems

Compatible with steel, aluminum, fiberglass, MDO plywood, HDO plywood, and lumber forms.

Recommended Form Materials

SpecStrip WB can be used on:

Steel forms
Aluminum forms
Fiberglass forms
Plastic forms
HDO plywood
MDO plywood
Dimensional lumber
BB grade plywood
Form liners and styrene bead systems

Application Instructions

Surface Preparation

Forms must be clean and free of concrete buildup, dirt, rust, and scale
Do not apply over contaminated or wet surfaces
Agitate product before use if needed

Application Method

Apply using low-pressure spray equipment with misting/atomizing tip
Apply a thin, uniform film across all form surfaces
Avoid over-application or puddling
Remove excess material if necessary using rags or squeegee

Important Notes

Do not dilute product
Over-application may cause dusting or surface issues
Proper thin application is critical for best performance

Coverage Rates

Coverage varies by substrate:

Form Type	Coverage
Steel / Plastic / Fiberglass	~1000 sq ft/gal
Aluminum (conditioned)	~1000 sq ft/gal
HDO / MDO Plywood	~1000 sq ft/gal
Dimensional Lumber	~1000 sq ft/gal
BB Grade Plywood	~1000 sq ft/gal

Actual coverage depends on surface condition and porosity.

Performance Characteristics

Smooth Concrete Finish

Promotes cleaner concrete surfaces with reduced voids and improved appearance.

Form Protection

Helps extend the life of reusable formwork systems by reducing wear and buildup.

Improved Productivity

Reduces stripping time and cleanup requirements on job sites.

Consistent Results

Ensures uniform release performance across multiple form types and materials.

Packaging

5 Gallon Pails
55 Gallon Drums
275 Gallon Totes

Shelf Life & Storage

Shelf Life

1 year in original sealed containers

Storage Conditions

Store in tightly sealed containers
Keep free from contamination (water, dirt, debris)
Store in a cool, dry environment
Agitate before use if stored long-term

Frequently Asked Questions

What is SpecStrip WB used for?

It is used as a water-based reactive form release agent to prevent concrete from bonding to forms and improve surface finish.

Does SpecStrip WB reduce bugholes?

Yes. It helps minimize surface voids and bugholes for a smoother concrete finish.

Can it be used on wood forms?

Yes. It is compatible with plywood and dimensional lumber form systems.

Does it leave residue on concrete?

No. When properly applied, it does not leave residue, stains, or discoloration.

Is it safe for steel forms?

Yes. It actually helps protect steel forms from rust and corrosion.

Does it need to be diluted?

No. It is a ready-to-use product and should not be diluted.

Technical Data Summary (TDS)

Product Type

Reactive water-based form release agent

Appearance

Liquid (water-based emulsion)

VOC Content

Low VOC compliant (<100 g/L)

Application Method

Low-pressure spray (mist application)

Coverage

~1000 sq ft/gal (varies by substrate)

Use Surfaces

Steel, aluminum, wood, fiberglass, plastic forms

Finish Result

Clean release, no residue

Packaging

5 gal / 55 gal / 275 gal

Shelf Life

1 year

Safety Data Summary (SDS)

Hazard Information

SpecStrip WB may:

Cause mild skin irritation
Cause eye irritation on contact
Require adequate ventilation during spraying

Recommended PPE

Safety glasses
Gloves
Protective clothing
Respirator if misting in enclosed areas

First Aid

Eye Contact

Flush with water for at least 15 minutes

Skin Contact

Wash with soap and water

Inhalation

Move to fresh air

Ingestion

Seek medical attention if symptoms occur

Cementitious Products & Liquids