Graco GrindLazer HP DC1021-G Gas Scarifier
Graco GrindLazer HP DC1021-G — Gas-Powered Concrete Scarifier for High-Production Surface Prep
The Graco GrindLazer HP DC1021-G is a heavy-duty, gas-powered concrete scarifier engineered for professional contractors who demand high-production surface preparation performance. Designed to aggressively remove concrete coatings, laitance, and deteriorated surface material, this walk-behind scarifier is built for demanding commercial and industrial jobsites. It operates using rotating flail cutters or milling drums that impact the concrete surface at high speed, delivering controlled material removal with consistent depth across large areas. The GrindLazer HP series is purpose-built for crews tackling parking structures, bridge decks, warehouse floors, and industrial slabs where throughput and reliability are non-negotiable.
Unlike conventional grinders or shot blasters, the GrindLazer HP DC1021-G combines gas-powered independence with Graco's proven drive and cutting system, eliminating the need for electrical infrastructure on remote or outdoor jobsites. Its high-performance scarifying action removes material faster than disc grinding alone, making it the preferred choice for stripping thick coatings, correcting surface profiles, and exposing aggregate for overlay bonding.
Key Features & Benefits
Gas-Powered Engine
The DC1021-G runs on gasoline, giving crews complete mobility on jobsites without access to three-phase power or generator support. This is critical for bridge decks, parking lots, and remote industrial pads where electrical hookup is impractical or unavailable.
High-Production Scarifying Drum
The scarifying drum assembly uses flail cutters or carbide-tipped cutters that deliver aggressive material removal rates far exceeding rotary grinding methods. Contractors reduce labor hours on large surface areas while achieving the CSP (Concrete Surface Profile) required for coatings and overlays.
Heavy-Duty Frame and Drive System
The GrindLazer HP is built on a robust steel frame with a drive system designed to maintain consistent forward pressure against the cutting head. This ensures uniform depth of cut and reduces operator fatigue over extended shifts on large floor areas.
Interchangeable Cutting Heads
Graco's GrindLazer platform supports a range of cutter configurations, allowing contractors to select the appropriate drum and cutter type for the material removal rate and surface profile required. This flexibility makes a single machine viable across multiple project types.
Dust and Debris Management Compatibility
The unit is designed to integrate with vacuum shrouds and dust collection systems, supporting OSHA silica dust compliance requirements on enclosed or semi-enclosed jobsites. Keeping the work environment clean reduces health risk and improves visibility during operation.
Rugged Construction for Jobsite Durability
Built to Graco's commercial-grade standards, the GrindLazer HP DC1021-G is engineered to withstand continuous use in harsh concrete environments. Contractors can rely on consistent performance across the life of the machine with proper maintenance, reducing total cost of ownership on long-term projects.
Common Applications
Concrete Coating Removal
Removes epoxy, urethane, and other floor coatings efficiently to prepare surfaces for new coating systems or overlays without excessive substrate damage.
Laitance and Surface Contamination Removal
Strips weak surface layers and contamination from concrete slabs, exposing clean, sound substrate required for proper adhesion of overlays and coatings.
Bridge Deck Scarifying
Gas-powered independence and aggressive cutting make this machine well-suited for bridge deck surface preparation where power access is limited and production rates are critical.
Parking Structure Renovation
Handles large open-deck areas efficiently, removing deteriorated concrete and coatings ahead of waterproofing or overlay installation.
Industrial Floor Preparation
Used in warehouse and manufacturing facilities to profile concrete floors prior to application of heavy-duty industrial coating systems.
Aggregate Exposure
Scarifying action exposes aggregate at a controlled depth for decorative or functional surface texture applications on commercial slabs.
Overlay Bonding Surface Prep
Creates the surface profile and cleanliness required for thin-set or polymer overlay systems to achieve full bond strength to the substrate.
Compatible Materials
- Portland cement concrete slabs
- Epoxy coatings and floor paint
- Urethane and polyurea coatings
- Concrete laitance and weak surface layers
- Asphalt overlays on concrete decks
- Masonry and cementitious substrates
- Bridge deck surfaces
- Parking structure decks
Technical Specifications
| Specification | Details |
|---|---|
| Model Number | 25M994 |
| Product Name | GrindLazer HP DC1021-G |
| Power Source | Gas (Gasoline) |
| Machine Type | Walk-Behind Concrete Scarifier |
| Drive Type | Self-Propelled |
| Manufacturer | Graco |
| Product Series | GrindLazer HP |
| Primary Application | Concrete Surface Preparation / Scarifying |
Operational Specifications
| UPC PRODUCT | 755652779032 |
|---|---|
| DIVISION | CED |
| FAMILY CODE | FAMGZU |
| COUNTRY OF ORIGIN | US |
| UNIT OF MEASURE | EA |
| HEIGHT | 53.5 IN | 135.890 CM |
| LENGTH | 69 IN | 175.260 CM |
| WIDTH | 31 IN | 78.740 CM |
| VOLUME | 66.225 FT3 | 1.875 M3 |
| SHIPPING WEIGHT | 450 LBS | 204.117 KG |
| HTS CODE (US) | 8479100080 |
| HTS CODE (CA) | 8479100090 |
Technical Specifications
| AIR FILTER TYPE | Donaldson Heavy-Duty |
|---|---|
| SERIES | High Production Series |
| VACUUM PORT | Yes |
| PRODUCT SERIES | High Production |
| MODEL | GrindLazer |
| MAXIMUM CUT WIDTH (MM) | 254 |
| MAXIMUM CUT WIDTH (IN) | 10 |
| MAXIMUM CUT WIDTH (CM) | 25 |
| MAXIMUM CUT RATE W/ LINEDRIVER (FT2/HR) | 2100 |
| LINEDRIVER REQUIRED | Required |
| ENGINE START TYPE | Electric Start |
| ENGINE SIZE (HP) | 21 |
| ENGINE BRAND | Vanguard |
| DEPTH_ADJUSTMENT | Manual |
| CUTTER DRUM DIAMETER (IN) | 5 |
| WATER CONNECTION | Optional |
Frequently Asked Questions
Q: What is the difference between scarifying and grinding for surface prep?
A: Scarifying uses rotating flail or carbide cutters that impact and chip the concrete surface, removing material much faster than disc grinding. It produces a rougher CSP profile suited for overlays, coatings, and damaged slab repair. Grinding is preferred when a finer, more uniform profile is required.
Q: Can the GrindLazer HP DC1021-G be used indoors?
A: As a gas-powered machine, it produces exhaust emissions and requires adequate ventilation for indoor use. For fully enclosed spaces, Graco offers electric-powered GrindLazer models. Outdoor, open-deck, and well-ventilated industrial settings are the primary use cases for the gas variant.
Q: What cutter types are compatible with this machine?
A: The GrindLazer HP platform supports multiple cutter drum configurations including flail cutters and carbide-tipped milling cutters. Cutter selection depends on the material being removed and the required surface profile — consult Graco's cutter compatibility guide for the DC1021-G drum width.
Q: Does this unit support dust collection for silica compliance?
A: The GrindLazer HP is designed to accept vacuum shroud and dust collection system attachments. Contractors should pair the unit with an appropriate HEPA-rated vacuum to meet OSHA Table 1 silica dust control requirements for scarifying operations.
Q: What maintenance is required to keep the machine in production condition?
A: Routine maintenance includes cutter inspection and replacement as wear is detected, engine servicing per the manufacturer's schedule, belt and drive system inspection, and debris clearing from the cutting chamber after each use. Keeping cutters sharp is the single most important factor in maintaining production rates.
Q: Is the GrindLazer HP DC1021-G available through distribution or only direct from Graco?
A: Graco distributes the GrindLazer HP line through authorized partners and dealers. The 25M994 model number is the ordering reference for this configuration. Contact your distributor or Diamond Tool Store for current availability and lead times.
Original: $16,106.25
-65%$16,106.25
$5,637.19
Description
Graco GrindLazer HP DC1021-G — Gas-Powered Concrete Scarifier for High-Production Surface Prep
The Graco GrindLazer HP DC1021-G is a heavy-duty, gas-powered concrete scarifier engineered for professional contractors who demand high-production surface preparation performance. Designed to aggressively remove concrete coatings, laitance, and deteriorated surface material, this walk-behind scarifier is built for demanding commercial and industrial jobsites. It operates using rotating flail cutters or milling drums that impact the concrete surface at high speed, delivering controlled material removal with consistent depth across large areas. The GrindLazer HP series is purpose-built for crews tackling parking structures, bridge decks, warehouse floors, and industrial slabs where throughput and reliability are non-negotiable.
Unlike conventional grinders or shot blasters, the GrindLazer HP DC1021-G combines gas-powered independence with Graco's proven drive and cutting system, eliminating the need for electrical infrastructure on remote or outdoor jobsites. Its high-performance scarifying action removes material faster than disc grinding alone, making it the preferred choice for stripping thick coatings, correcting surface profiles, and exposing aggregate for overlay bonding.
Key Features & Benefits
Gas-Powered Engine
The DC1021-G runs on gasoline, giving crews complete mobility on jobsites without access to three-phase power or generator support. This is critical for bridge decks, parking lots, and remote industrial pads where electrical hookup is impractical or unavailable.
High-Production Scarifying Drum
The scarifying drum assembly uses flail cutters or carbide-tipped cutters that deliver aggressive material removal rates far exceeding rotary grinding methods. Contractors reduce labor hours on large surface areas while achieving the CSP (Concrete Surface Profile) required for coatings and overlays.
Heavy-Duty Frame and Drive System
The GrindLazer HP is built on a robust steel frame with a drive system designed to maintain consistent forward pressure against the cutting head. This ensures uniform depth of cut and reduces operator fatigue over extended shifts on large floor areas.
Interchangeable Cutting Heads
Graco's GrindLazer platform supports a range of cutter configurations, allowing contractors to select the appropriate drum and cutter type for the material removal rate and surface profile required. This flexibility makes a single machine viable across multiple project types.
Dust and Debris Management Compatibility
The unit is designed to integrate with vacuum shrouds and dust collection systems, supporting OSHA silica dust compliance requirements on enclosed or semi-enclosed jobsites. Keeping the work environment clean reduces health risk and improves visibility during operation.
Rugged Construction for Jobsite Durability
Built to Graco's commercial-grade standards, the GrindLazer HP DC1021-G is engineered to withstand continuous use in harsh concrete environments. Contractors can rely on consistent performance across the life of the machine with proper maintenance, reducing total cost of ownership on long-term projects.
Common Applications
Concrete Coating Removal
Removes epoxy, urethane, and other floor coatings efficiently to prepare surfaces for new coating systems or overlays without excessive substrate damage.
Laitance and Surface Contamination Removal
Strips weak surface layers and contamination from concrete slabs, exposing clean, sound substrate required for proper adhesion of overlays and coatings.
Bridge Deck Scarifying
Gas-powered independence and aggressive cutting make this machine well-suited for bridge deck surface preparation where power access is limited and production rates are critical.
Parking Structure Renovation
Handles large open-deck areas efficiently, removing deteriorated concrete and coatings ahead of waterproofing or overlay installation.
Industrial Floor Preparation
Used in warehouse and manufacturing facilities to profile concrete floors prior to application of heavy-duty industrial coating systems.
Aggregate Exposure
Scarifying action exposes aggregate at a controlled depth for decorative or functional surface texture applications on commercial slabs.
Overlay Bonding Surface Prep
Creates the surface profile and cleanliness required for thin-set or polymer overlay systems to achieve full bond strength to the substrate.
Compatible Materials
- Portland cement concrete slabs
- Epoxy coatings and floor paint
- Urethane and polyurea coatings
- Concrete laitance and weak surface layers
- Asphalt overlays on concrete decks
- Masonry and cementitious substrates
- Bridge deck surfaces
- Parking structure decks
Technical Specifications
| Specification | Details |
|---|---|
| Model Number | 25M994 |
| Product Name | GrindLazer HP DC1021-G |
| Power Source | Gas (Gasoline) |
| Machine Type | Walk-Behind Concrete Scarifier |
| Drive Type | Self-Propelled |
| Manufacturer | Graco |
| Product Series | GrindLazer HP |
| Primary Application | Concrete Surface Preparation / Scarifying |
Operational Specifications
| UPC PRODUCT | 755652779032 |
|---|---|
| DIVISION | CED |
| FAMILY CODE | FAMGZU |
| COUNTRY OF ORIGIN | US |
| UNIT OF MEASURE | EA |
| HEIGHT | 53.5 IN | 135.890 CM |
| LENGTH | 69 IN | 175.260 CM |
| WIDTH | 31 IN | 78.740 CM |
| VOLUME | 66.225 FT3 | 1.875 M3 |
| SHIPPING WEIGHT | 450 LBS | 204.117 KG |
| HTS CODE (US) | 8479100080 |
| HTS CODE (CA) | 8479100090 |
Technical Specifications
| AIR FILTER TYPE | Donaldson Heavy-Duty |
|---|---|
| SERIES | High Production Series |
| VACUUM PORT | Yes |
| PRODUCT SERIES | High Production |
| MODEL | GrindLazer |
| MAXIMUM CUT WIDTH (MM) | 254 |
| MAXIMUM CUT WIDTH (IN) | 10 |
| MAXIMUM CUT WIDTH (CM) | 25 |
| MAXIMUM CUT RATE W/ LINEDRIVER (FT2/HR) | 2100 |
| LINEDRIVER REQUIRED | Required |
| ENGINE START TYPE | Electric Start |
| ENGINE SIZE (HP) | 21 |
| ENGINE BRAND | Vanguard |
| DEPTH_ADJUSTMENT | Manual |
| CUTTER DRUM DIAMETER (IN) | 5 |
| WATER CONNECTION | Optional |
Frequently Asked Questions
Q: What is the difference between scarifying and grinding for surface prep?
A: Scarifying uses rotating flail or carbide cutters that impact and chip the concrete surface, removing material much faster than disc grinding. It produces a rougher CSP profile suited for overlays, coatings, and damaged slab repair. Grinding is preferred when a finer, more uniform profile is required.
Q: Can the GrindLazer HP DC1021-G be used indoors?
A: As a gas-powered machine, it produces exhaust emissions and requires adequate ventilation for indoor use. For fully enclosed spaces, Graco offers electric-powered GrindLazer models. Outdoor, open-deck, and well-ventilated industrial settings are the primary use cases for the gas variant.
Q: What cutter types are compatible with this machine?
A: The GrindLazer HP platform supports multiple cutter drum configurations including flail cutters and carbide-tipped milling cutters. Cutter selection depends on the material being removed and the required surface profile — consult Graco's cutter compatibility guide for the DC1021-G drum width.
Q: Does this unit support dust collection for silica compliance?
A: The GrindLazer HP is designed to accept vacuum shroud and dust collection system attachments. Contractors should pair the unit with an appropriate HEPA-rated vacuum to meet OSHA Table 1 silica dust control requirements for scarifying operations.
Q: What maintenance is required to keep the machine in production condition?
A: Routine maintenance includes cutter inspection and replacement as wear is detected, engine servicing per the manufacturer's schedule, belt and drive system inspection, and debris clearing from the cutting chamber after each use. Keeping cutters sharp is the single most important factor in maintaining production rates.
Q: Is the GrindLazer HP DC1021-G available through distribution or only direct from Graco?
A: Graco distributes the GrindLazer HP line through authorized partners and dealers. The 25M994 model number is the ordering reference for this configuration. Contact your distributor or Diamond Tool Store for current availability and lead times.
